Description
-
2 way full range powered loudspeaker for portable PA and installation applications
-
2,500 Watt power featuring Klark Teknik Class-D technology
-
Klark Teknik Digital Signal Processing for total system control
-
ULTRANET digital audio networking connects to mixers and other sources
-
12" low frequency driver with low mass voice coil for improved transient response
-
Aluminium dome 1" neodymium motor compression driver
-
Low distortion waveguide provides 70º H x 70º V dispersion
-
Fully featured user interface with LCD display for ease of navigation
-
PC remote control software downloadable at turbosound.com
-
15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
-
Rugged powder coated perforated steel mesh grille
-
Integral 35 mm pole mount and handles
-
Multiple internal rigging points allow bracket mount and suspension in any orientation
-
Mains input on Neutrik powerCON* connector

NuQ122-AN
The 2 way full range NuQ122-AN is a 2,500 Watt 12" powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ122-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
Output power for the NuQ122-AN is provided by means of an efficient and lightweight Klark Teknik 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.
ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.
Architecture & Engineering Specifications
The loudspeaker shall be of the full range, two-way, powered type, consisting of one 12" (316 mm) LF driver and one 1" (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V. Maximum amplifier output power shall be 2,500 Watts peak, independent of limiters and driver protection circuits. Maximum SPL (peak), measured at 1 metre with music program, shall be 131 dB. Dimensions: 656 mm high x 374 mm wide x 340 mm deep (25.8" x 14.7" x 13.4"). Net weight: 20.2 kg (44.5 lbs). The loudspeaker system shall be the Turbosound NuQ122-AN. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
Specification
System
Frequency Response |
55 Hz – 18 kHz ±3 Db |
Nominal Dispersion |
70° H x 70° V @ -6 dB points |
Maximum SPL |
131 dB peak |
Crossover Type |
Active |
Transducers |
1 x 12" ( 315.5) LF driver |
Limiter |
Independent HF, LF, peak and rms |
Amplifier
Maximum Output Power* |
2,500 W |
Connectors
Input/link |
1 x Combo Jack/XLR 1 x XLR |
Ultranet input/link |
2 x RJ45 |
Mains Supply |
Neutrik powerCON 20A† |
Controls
DSP |
Rotary push-encoder and level control |
User DSP Functions
Factory EQ Presets |
Positioning, Sound mode, FBQ |
Display |
LCD 128 x 32, blue, backlit |
Delay |
0 - 300 ms |
Equalisation |
High and low shelving EQ 2 x parametric EQ |
Limiter |
Zero attack input limiter |
Presets |
20 total presets, 19 user-definable |
Crossover |
High Pass L-R 24 dB/oct |
Protection |
Lock-out function for all settings |
Ultranet Digital Network
Digital processing | |
System | |
Cabling |
Power Supply
Power consumption |
90 W @ 1/8 max power |
Voltage (fuses) |
Enclosure
Dimensions HWD |
656 x 374 x 340 mm (25.8 x 14.7 x 13.4") |
Net weight |
20.2 kg (44.5 lbs) |
Construction |
15 mm (5/8") birch plywood |
Finish |
Semi matt black paint |
Grille |
Powder coated perforated steel |
Flying hardware |
M10 x 8 points |
Online Financing
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.