A press patch box is a special audio signal splitter, which is developed for the specific requirements of a press conference. Via separate inputs, you can connect either a microphone or a line signal (mixer output).Also available as a stereo version (PPB20S)
A high-quality input amplifier with balanced earth-free input allows for a level adjustment over a wide range. 20 transformer-balanced XLR/m jacks with individual driver circuits in pairs are available as outputs for video cameras or other sound recording devices.
The nominal output level is +4 dBu at 600 ohms. In addition, channels 19 and 20 are equipped with TRS phone jacks for balanced or unbalanced signals and with RCA sockets (-10 dBu nominal level).
If more than 20 outputs are required, further PPB20 units can be cascaded via a BUS IN/OUT socket on the rear panel. A 10-fold LED chain and an adjustable headphone amplifier are used for signal monitoring (display range -40 to +10 dB, 0 dB display corresponds to +4 dBu output).
The PPB20 has a built-in shielded power pack. An additional DC input allows for battery operation or using an emergency power supply. PW4 is a suitable emergency power supply for two PPB20.
|Type||mic & line split|
|Split type||1 in 20|
|Max. input level||Mic: 0 dBu, Line: +20 dB|
|Number of split-outputs per canal||20|
|Max. output level||+ 20 dB|
|Output connectors||6.3 mm jack , RCA , XLR|
|Transformer isolated outputs||Yes|
|Controls||attenuator , ground lift , input gain , mic/line switch , phones level|
|Indicators||input level , Power|
|Operating voltage||integrated (115 / 230 V)|
|Cabinet material||sheet steel|
|Cabinet surface||Powder coated|