Crown Audio Macro-Tech 36x12 Two-Channel Power Amplifier 1120W @ 8 Ohms - USED

In stock Save $250.01Used

This product backed with 30-days warranty.

If you have any question please chat with us or call us at (514) 780-0648

Sale price$849.99 Regular price$1,100.00


Crown Audio Macro-Tech 36x12 Two-Channel Power Amplifier 1120W @ 8 Ohms

The Crown Macro-Tech Series is the defining standard for amplifier design today. No compromises, no gimmicks. Just brilliant engineering backed by superior manufacturing, support and an unsurpassed commitment to quality. Like all Crown amps, the defining characteristic of the Macro-Tech Series is sonic accuracy. A tight, rock-solid low end, with smooth, detailed highs and a well-defined midrange. In short, the most accurate reproduction of an audio signal you’ve ever heard. And because we put the quality of sound above all else, a Crown is the most coveted amplifier in the business.

When it comes to manufacturing amps, our work is based on one simple fact: there are no shortcuts to quality. And our Macro-Techs have proven it time and time again in some of the most demanding applications in the world.

Developing innovative products that meet your specific needs is what we’re about. MacroTech 24x6 and 36x12 provide a practical solution to biamplified system applications such as stage monitors. Each amp combines a highand medium-power module in a single, lowprofile unit.

  • Crown’s Grounded Bridge™ design delivers large voltage swings without using easily stressed output-transistor configurations like conventional amplifi ers. The results are lower distortion and superior reliability.

  • Patented ODEP® (Output Device Emulation Protection) circuitry compensates for overheating and overload to keep the amplifi er working when others would fail.

  • IOC® (Input/Output Comparator) circuitry immediately alerts of any distortion exceeding 0.05%, providing dynamic proof of distortion-free performance.

  • PIP™ (Programmable Input Processor) connector accepts accessory modules that tailor the amplifi er to suit specifi c applications.

  • Convenient high- and medium-power channel design for biamplifi ed systems such as stage monitors.

  • Very low harmonic and intermodulation distortion results in the best dynamic transfer function in the industry.

  • Balanced 1/4-inch(6.35-mm) phone jack inputs for each channel, with balanced XLR connectors on the standard PIP-FX module.

  • Full protection from shorted, open and mismatched loads; general overheating; DC; high-frequency overloads; and internal fault conditions.

Load Impedance: Safe with all types of loads, even reactive ones. Rated for 2 to 16 ohms.

Voltage Gain to 8-ohm load at rated output at 1 kHz, maximum level setting:

Channel 1 (3600): 124.6:1 ±6% or 41.9 dB ±0.5 dB at 0.775-volt sensitivity; 69.2:1 ±6% or 36.8 dB ±0.5 dB at 1.4-volt sensitivity.

Channel 2 (1200): 64:1 ±6% or 36 dB ±0.5 dB at 0.775-volt sensitivity; 35.5:1 ±6% or 31 dB ±0.5 dB at 1.4-volt sensitivity. 20:1 ±6% or 26 dB ±0.5 dB at +26 dB sensitivity.

Required AC Mains: All units require 90 watts or less at idle. Current, voltage and frequency requirements are provided on the unit’s back panel.

AC Line Connector: NEMA 5-15P.


Frequency Response: ±0.1 dB from 20 Hz to 20 kHz at 1 watt.

Phase Response: ±10 degrees from 10 Hz to 20 kHz at 1 watt.

Signal-to-Noise Ratio: 20 Hz to 20 kHz: Better than 105 dB A-weighted or 100 dB unweighted below rated full bandwidth power.

Total Harmonic Distortion (THD): At full bandwidth power, less than 0.05% from 20 Hz to 1 kHz increasing linearly to less than 0.1% at 20 kHz.

Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) Less than 0.05% from 10 milliwatts to full bandwidth power.

Damping Factor: Greater than 1,000 from 10 Hz to 400 Hz.

Slew Rate: (Slew rates are limited to useful levels for ultrasonic/RF protection.) Channel 1, greater than 30 volts per microsecond; Channel 2, greater than 13 volts per microsecond.

Shipping Weight: 59 lbs (26.8 kg).

Online Financing

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Estimate shipping

You may also like

Recently viewed