The EUROCOM MA6480A DualDrive Power Amplifier from Behringer allows you to distribute audio to speakers in two different zones and page listeners within those zones. This unit also allows for the installation of hybrid multi-zone systems combining distributed music and low-impedance speakers because it is driven by two independent Class-D mono amplifiers. The first amplifier operates with a standard low impedance output while the second features a selectable output voltage of 70 or 100 volts
The unit is capable of up to 240-watts of output and features two channels with combo XLR/TRS mic/line inputs. It also has one four-pin Euroblock input in channel one and one three-pin Euroblock input in channel two that run in parallel with the combo XLR/TRS inputs. The front panel of the MA6480A features a master three-band parametric EQ as well two input control knobs and a master volume control knob. Your levels are displayed by the two LED VU meters. The MA6480A is designed for continuous operation in installed sound settings that require distributed music and paging such as hospitality, retail, fitness, business, and educational settings.
| Audio Inputs | 2x Combo XLR/TRS mic/line 1x 4-Pin Euroblock mic/line (in parallel) 1x 3-Pin Euroblock mic/line (in parallel) |
| Input Impedance | Mic: -50 to 0 dBV @ 600 Ω (electronically balanced) Line: -27 to 0 dBV @ 600 Ω (electronically balanced) |
| Phantom Power | 24 VDC Switchable on inputs 1 & 2 |
| Audio Outputs | Amplifier Output: 1x 4-Pin female Euroblock Lo-Z Output: 2x terminals @ 4 Ω Hi-Z: 2x terminals @ 70/100 V (switchable) Output Regulation: < 2 dB (no load to full load) |
| Remote Output | 1x 5-Pin Euroblock for optional wired remote |
| Amplifier | Channels: Lo-Z: 1x 4 Ω (minimum) Hi-Z: 1x 70/100 V (switchable) Power Output: Lo-Z: 240 W RMS @ 4 Ω Hi-Z: 240 W RMS @ 70/100 V Minimum Impedance:: Lo-Z: 4 Ω (1% THD @ 1 kHz sine wave) Hi-Z: 20 Ω @ 70 V, 42 Ω @ 100 V (1% THD @ 1 kHz sine wave) |
| Dynamic Range | Mic: 65 dB Line: 80 dB |
| THD & Noise | 0.5% @ 1 kHz (rated output) |
| Frequency Response | 50 Hz to 18 kHz (± 2 dB) |
| Tone Controls | Low: +/- 15 dB @ 20 to 800 Hz Mid: +/- 15 dB @ 700 Hz to 7 kHz High: +/- 15 dB @ 5 to 20 kHz Q: 0.5 to 5 |
| Connections | Remote: 1x 5-Pin Euroblock Common: -5 VDC @ 100 mA (short-circuit protected) Remote Power: 5 VDC @ 100 mA (current limited, short-circuit protected) RVC: 10 kΩ linear taper potentiometer Power On/Off: 5 VDC voltage make contact input, no open voltage Mute: No voltage make contact input, open voltage 5 VDC (short circuit: < 10 mA) Input 1 Control: No voltage make contact input, open voltage 5 VDC (short circuit: < 10 mA) |
| Indicators | Power: Yellow LED ring illumination Overload: Red LED ring illumination Output Level: LED VU meter (yellow and red when clipping) |
| Power Supply | Mains Voltage: 100 to 120/220 to 240 VAC, 60/50 Hz (switchable) Mains Connector: Standard IEC receptacle Fuse: T 6.3 AH 250 V/T 3.15 AH 250 V Power Efficiency: 77% maximum |
| Power Consumption | Idle: 39 W 1/8 Power: 120 W 1/3 Power: 240 W Full Power: 620 W |
| Dimensions | 3.5 x 17.00 x 16.00" (8.8 x 43.2 x 40.6 cm) |
| Weight | 12.8 lb (5.8 kg) |